Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Ultimate" CAD machine requirements

Status
Not open for further replies.
T1936

T1936

Computer
Joined
Feb 5, 2005
Messages
56
Location
US
Hi All,

I have just been given a healthy budget for a single CAD machine and thought I would see what others suggest such a machine should consist of.

I will be running SE17, and doing a mix of both 2D and 3D work on the machine.

Suggestions?

Thanks!
 
Sort by date Sort by votes
HP XW9300 w/dual Opterons
4 GB Memory
Dual U320 SCSI 15K RPM drives in a Raid 0 config
NVIDIA Quadro FX 4400
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

garmancm
  • Locked
  • Question Question
Surfaces "moving" glitch causing problems in assemblies
Replies
0
Views
271
garmancm
garmancm
garmancm
  • Locked
  • Question Question
Any way to "simplify" a large assy model converted to a step?
Replies
3
Views
361
bshand
bshand
garmancm
  • Locked
  • Question Question
Any way to use something like "View Configurations" that changes constraints/position?
Replies
4
Views
310
KENAT
KENAT
garmancm
  • Locked
  • Question Question
Create an "offset hem" or "countersunk lap seam" in SE with Sheet Metal
Replies
2
Views
506
kjoiner
kjoiner
ct27gt
  • Locked
  • Question Question
Insight Hardware Requirements for 11,000 CAD Files?
Replies
8
Views
381
bshand
bshand

Part and Inventory Search

Sponsor

Back
Top