Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Ultimate" CAD machine requirements

Status
Not open for further replies.
T1936

T1936

Computer
Feb 5, 2005
56
Hi All,

I have just been given a healthy budget for a single CAD machine and thought I would see what others suggest such a machine should consist of.

I will be running SE17, and doing a mix of both 2D and 3D work on the machine.

Suggestions?

Thanks!
 
Replies continue below

Recommended for you

Sort by date Sort by votes
HP XW9300 w/dual Opterons
4 GB Memory
Dual U320 SCSI 15K RPM drives in a Raid 0 config
NVIDIA Quadro FX 4400
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

garmancm
  • Locked
  • Question
Surfaces "moving" glitch causing problems in assemblies
Replies
0
Views
201
garmancm
garmancm
garmancm
  • Locked
  • Question
Any way to "simplify" a large assy model converted to a step?
Replies
3
Views
277
bshand
bshand
garmancm
  • Locked
  • Question
Any way to use something like "View Configurations" that changes constraints/position?
Replies
4
Views
212
KENAT
KENAT
garmancm
  • Locked
  • Question
Create an "offset hem" or "countersunk lap seam" in SE with Sheet Metal
Replies
2
Views
398
kjoiner
kjoiner
ct27gt
  • Locked
  • Question
Insight Hardware Requirements for 11,000 CAD Files?
Replies
8
Views
243
bshand
bshand

Part and Inventory Search

Sponsor

Back
Top Bottom