Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Stress Wizard: Toggle Contour - Stress/Displacement" Button

Status
Not open for further replies.
MigFEM

MigFEM

New member
Joined
Mar 13, 2013
Messages
1
Location
BR

Hi, everyone.

On FEMAP Stress Wizard once you reach STEP 4, it displays some buttons like "Run this model and recover answers", "List Reaction Forces on Surface(s)" and "Toggle Contour - Stress Displacement". I think you can gain some time improvement using this buttons on the analysis. My question is: does anyone know if is it possible and HOW to insert this buttons on the Toolbar?

If anyone even know which one are the .BAS or the .MAC file that does that, please reply me.

Thanks a lot.
 
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question Question
Using glued to avoid stress concentration with plate elements
Replies
3
Views
4K
rb1957
rb1957
Mark172
  • Locked
  • Question Question
Stress at junction of plate and solid elements with skins not realistic. Is this normal?
Replies
11
Views
1K
BlasMolero
BlasMolero
ecFem
  • Locked
  • Question Question
Stress-strain curve not respected in NL analysis
Replies
16
Views
1K
rb1957
rb1957
TheMesh
  • Locked
  • Question Question
Different displacement with compression GAP and tension GAP
Replies
5
Views
824
TheMesh
TheMesh
manees90
  • Locked
  • Question Question
How to Mesh Surfaces with 90-Degree Bends Using Shell Elements to Minimize Artificial Stresses
Replies
1
Views
2K
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top