"Shell Spec" Valve vendors - (Ball & Globe)

[raguabz]

hi all, I have been trying to get a valve vendors whose products (ball and globe valves) meet shell MESC SPE 77/300A on an urgent basic without much success.Can anyone with knowledge or suggestion of a valve vendor out there that can satisfy these requirement please help.
For info:

Ball valve, FB, 3/4" NB 150# to ISO-17292

Globe valve, straight pattern, 2" 150# RF to BS-1873


All are SEP category, PED fluid group 1 service suitability

thanks all.

 

[hsbcn]

Please send us the enquiry on

http://www.alloy-valves.com

; we should be able to help you out on this job.

Corrosion resistant, exotic alloy valves from The Alloy Valve Stockist in Barcelona, Spain [URL unfurl="true"]http://valvestockist.com[/url]

 

[raguabz]

Hsbcn/All,

After some frantic digging, we've found some old stocks that meets our requirements in-house.

Your time/response is appreciated. I now have one more stockist on my list to contact in future.

Thanks

 

[gerhardl]

It is always an idea to ask the end user if he will reveal what valve brands he has used before or will be able to accept. Then you start from there.