"Save as" status bar refresh bug.

[stephlouv]

Under NX9.0.1.3

Look at the status bar when doing a "save as" (outside TeamCenter).

http://youtu.be/SVy73xYjF6Y

I have this refresh bug on two completely different workstation, one with a FireGL, one with a Quadro.
I even now upgrade my Quadro graphic driver for the one certifier for NX9, same issue.
So, to me, it's not link now to my hardware but it's more a NX bug.

Stephane

"My english is bad ? That's why i'am french."

 

[cowski]

It isn't clear to me what you are trying to point out as a bug. However, there are some known issues with save-as in NX 9.0.1; you should install the latest MR (9.0.3) to get all the available fixes. Re-test after installing the MR, if it is still an issue - report it to GTAC.

www.nxjournaling.com

 

[stephlouv]

NX does refresh the screen and so you don't see the prompt the question in the status bar.
You then don't know, during a save as cascade what for you're about to enter the new name.
This, until you make the "file name" window fly over the status bar.

It's out of my position (advanced drafter / trainer) to decide to install or not MP or MR pack. :-(


"My english is bad ? That's why i'am french."

 

[stephlouv]

erratum : "NX does NOT refresh the screen ...."

"My english is bad ? That's why i'am french."

 

[JohnRBaker]

I believe this issue was addressed in a later MR. Please install the NX 9.0.3.4 update and see if that solves the problem.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.