The default gray part color has changed on me to a bright white. I cannot find any way to change it back as all the sliders under "ref_color1" are not active. I typically use a white background so now my new and existing parts and assemblies are bright white and not very visible. I think what is different is the "intensity" and "ambient" which are now both "90" whereas I believe they were around 50 or 55 before. I am on Creo 3.0, M010
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
"ref_color1" default changed on me
- Thread starter tsorel
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question