Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
"Putting Material"? that complies with AISC specs.
- Thread starter rmiFL
- Start date
- Thread starter
- #5
Is this anchor bolt in concrete? Or is the grating tied down to a girder?
If it's concrete, chances are that the specifier wants to fill the annular void between the bolt and drilled hole. An epoxy grout type material should be what they're looking for.
Regards,
Qshake
![[pipe]](/data/assets/smilies/pipe.gif "[pipe] [pipe]")
Eng-Tips Forums:Real Solutions for Real Problems Really Quick.
If it's concrete, chances are that the specifier wants to fill the annular void between the bolt and drilled hole. An epoxy grout type material should be what they're looking for.
Regards,
Qshake
Eng-Tips Forums:Real Solutions for Real Problems Really Quick.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question