Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Jaked Piles" 1

Status
Not open for further replies.

sigma1

Structural
Joined
Jun 26, 2003
Messages
105
Location
US
Any information or link on "Jacked Piles" will be appreciated.

Thank you
 
excavate under existing foundation slab. Insert pile into ground. Jack up to slab level to take load. I believe this is the rough process. They are used in underpinning work I believe. Any good foundation textbook will give you a better explanation.
 
Hubbell Power Systems distributes both Chance and Atlas resistence piers, aka jacked piers. There are several on the market but these guys have been around for a long time. Hayward Baker Inc is an installer of these products in North America.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top