Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Interpolating" to estimate exact frequency of peak from FFT results

Status
Not open for further replies.
electricpete

electricpete

Electrical
Joined
May 4, 2001
Messages
16,774
Location
US
Please see my thread in the Mechanical/Vibration forum thread384-208992 and provide responses at that location

(please don't provide them here, I'd like to keep them all in one place)

Thanks!

=====================================
Eng-tips forums: The best place on the web for engineering discussions.
 
Status
Not open for further replies.

Similar threads

LJP1
  • Locked
  • Question Question
TCP Port remote testing "Appliance"
Replies
0
Views
724
LJP1
LJP1
mrtangent2
  • Locked
  • Question Question
Fibre Optic systems "for dummies" (hopefully ok to ask) - coaxial testing
Replies
1
Views
7K
djs
djs
rumahhutan
  • Locked
  • Question Question
Maturity Level of SCADA
Replies
0
Views
1K
rumahhutan
rumahhutan
electricpete
  • Locked
  • Question Question
repair shop replies to RFQ with boilerplate and irrelevant questions
Replies
1
Views
782
danw2
danw2
BOUFEK
  • Locked
  • Question Question
Why can't i get a mili Amp mA value from this leveltransmitter
Replies
7
Views
995
BOUFEK
BOUFEK

Part and Inventory Search

Sponsor

Back
Top