Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

quick disconnect for cryo system

Status
Not open for further replies.
OtoGrad

OtoGrad

Bioengineer
May 9, 2007
3
Can you recommend on a quick disconnect and manufacturer for cryosurgery system. We use nitrous oxide at 650-800psi in ambient temperature.

Thanks!
 
Status
Not open for further replies.

Similar threads

Radius1
  • Question
Looking for specification for identifying pearlite in cast iron sample.
Replies
0
Views
1K
Radius1
Radius1
BSMEclassof2012
  • Question
Brine concentration for pumps made from ductile cast
Replies
1
Views
1K
EdStainless
EdStainless
S
  • Locked
  • Question
Software for Material Engineers
Replies
4
Views
3K
Saman2002
S
ShabsRBI
  • Locked
  • Question
Burst Calculation for Boiler Steam Drum for RBI model
Replies
1
Views
2K
BEMPE16524
BEMPE16524
C
  • Locked
  • Question
Valve selection for phosphoric acid
Replies
0
Views
1K
chok7
C

Part and Inventory Search

Sponsor

Back
Top Bottom