Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Question on all forces being applied on the attached.
- Thread starter JEMG
- Start date
Hi JEMG
You haven’t shown any stresses on the 1” plate, all you have shown is a vertical load of 36000lb in a vertical direction. What you need to do is draw a free body diagram of the 1” plate and label all the forces acting on the plate which should include the reaction forces to 36000lb force where it joins the rod.
“Do not worry about your problems with mathematics, I assure you mine are far greater.” Albert Einstein
You haven’t shown any stresses on the 1” plate, all you have shown is a vertical load of 36000lb in a vertical direction. What you need to do is draw a free body diagram of the 1” plate and label all the forces acting on the plate which should include the reaction forces to 36000lb force where it joins the rod.
“Do not worry about your problems with mathematics, I assure you mine are far greater.” Albert Einstein
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question