Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

question about build special Factor from Admas/Car

Status
Not open for further replies.
albertmao

albertmao

Automotive
Joined
Jan 10, 2016
Messages
1
Location
DE
Hallo,


How can I build the mass of a rod in a suspension as Factor in ADAMS/Insight, when I output the model from Adams/Car?

Should I use "Parameter Variable"? "General Data Elements-Variable" ? or others?

Thanks.
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
Adams Car Control Subroutine
Replies
0
Views
2K
mthu
M
John.B
  • Locked
  • Question Question
Calculation of deviation from target path - ADAMS CAR
Replies
8
Views
1K
GregLocock
GregLocock
alok_singh
  • Locked
  • Question Question
driveline_active in adams car template ?
Replies
2
Views
1K
alok_singh
alok_singh
alok_singh
  • Locked
  • Question Question
Discussion about portal axle
Replies
0
Views
777
alok_singh
alok_singh
ichbinpulkit
  • Locked
  • Question Question
ADAMS CAR / Curve modification / Smoothning
Replies
6
Views
1K
ichbinpulkit
ichbinpulkit

Part and Inventory Search

Sponsor

Back
Top