Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Question about 2006 World Conference

Status
Not open for further replies.

bloodclot

Mechanical
Jan 5, 2006
135
To those of you who have been there before, do you know if you can use video cameras during the break-out sessions? I would like to be able to bring the most information back to my engineering group as possible. I just know that a some of what I learn over those couple of days will be forgotten by the time I get back. Also, are the break-out sessions held in conference rooms and how many people can I expect to be in a break-out session?

Thanks,
Bloodclot

Why do they put Braille dots on the keypad of the drive-up ATM?
 
Replies continue below

Recommended for you

Usually ANY recording device, video and audio, is prohibited in these types of conferences.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
Sr IS Technologist
L-3 Communications
 
I don't believe they will let you use a video camera. You will recieve a CD containing all the presentations so this may be helpful to you. Most presenters also offer their presentations for download from a website.

The sessions are held in confrence rooms and the number of people really depends on varying factors. I would say you will see a minimum of 30-40 people and the max could be much more than that (maybe 100-125?). This will be the best attended SW confrence ever. Last I heard (about 3 weeks ago)registration was about 3000.

A word of advice, get to your sessions early. When the room is full you will be turned away.

Rob Rodriguez CSWP
President: Northern
Vermont SolidWorks User Group
(updated 1/12/06)
SW 2006 SP 3.0
 
Thanks everyone for your input. Hope to see you there!

Bloodclot

Why do they put Braille dots on the keypad of the drive-up ATM?
 
They will send you a CD about two month after the conf. All the powerpoints should be on this cd for you company to review
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor