Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

QP1 and QP2 certification

Status
Not open for further replies.
jartgo

jartgo

Civil/Environmental
Joined
Oct 20, 2005
Messages
220
Location
US
I have an old (1960) elevated steel water storage tank, covered in lead paint. Should I or should I not require the subject certifications from the painting/rehab contractor.
 
Status
Not open for further replies.

Similar threads

swazimatt
  • Locked
  • Question Question
reservoir and Booster pumps
Replies
8
Views
5K
swazimatt
swazimatt
S
  • Locked
  • Question Question
HDD, Duckbill Valve and Air Valve
Replies
8
Views
7K
pointsman
pointsman
djcbgn
  • Locked
  • Question Question
Fluoride addition and pH
Replies
3
Views
1K
EdStainless
EdStainless
T
  • Question Question
How to determine optimal DO and ORP sensor placement for a carousel-type oxidation ditch with fine bubble aeration
Replies
1
Views
8K
bimr
bimr
H
  • Locked
  • Question Question
Slow sand filtration - sand supply and control of the filtration rate
Replies
6
Views
6K
pierreick
pierreick

Part and Inventory Search

Sponsor

Back
Top