Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Q-slice mode

Status
Not open for further replies.
maraia

maraia

Electrical
Joined
Sep 22, 2005
Messages
4
Location
DE
Hello,
I am making some simulations with Ansys and now I want to get the results in a slice that cuts my strucuture in two halfs.
Does anyone know how to do that?
Thnk you very much,
Maraia
 
Sort by date Sort by votes
Hi,

You can use these commands:

/TYPE,1,8
/CPLANE, 1 ! The working plane is the cutting plane

Reposition the Working plane at the desired position. (WPROTA, WPOFFS)

See also "12.4. Q-Slice Techniques" in the Ansys User Manual.

Regards
Alex
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

bkal
  • Locked
  • Question Question
Mode Selection Based on the Mode Coefficients
Replies
0
Views
434
bkal
bkal
md_salem
  • Locked
  • Question Question
how to extract mode shapes vectors from ANSYS WORKBENCH file ?
Replies
0
Views
522
md_salem
md_salem
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
vickyiamlucky
  • Locked
  • Question Question
Ansys Symmetry model to full model cut boundary dispacemnt or force bc
Replies
0
Views
725
vickyiamlucky
vickyiamlucky
struclearner
  • Locked
  • Question Question
Beams Modeling Bolts “Behavior” Options
Replies
2
Views
2K
struclearner
struclearner

Part and Inventory Search

Sponsor

Back
Top