Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PVElite Terminology 1

Status
Not open for further replies.
PPVE

PPVE

Mechanical
Joined
Mar 5, 2003
Messages
11
Location
GB
What is the meaning of the following expression, found in PVELite calculation output:

"The Drop for this Nozzle is .... x.xxxx mm"

Any helpful response would be appreciated.

Regards,

Ralph
 
Sort by date Sort by votes
I believe they are referring to the amount of extra pipe that gets cut off, "drop", that you will have when the nozzle is inserted into a shell/head, i.e. the amount extra you will need for the bill of materials in order to get the projected length you require for the nozzle.

Brian
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

imransaeed1804
  • Locked
  • Question Question
Applying torsional moment to shell/support in PVElite
Replies
4
Views
747
imransaeed1804
imransaeed1804
SmallInfo
  • Locked
  • Question Question
Clarification for Warning in PVElite
Replies
2
Views
378
dig1
dig1
SmallInfo
  • Locked
  • Question Question
Difference in Area Calculation for Nozzle in PVELITE
Replies
2
Views
319
SmallInfo
SmallInfo
SmallInfo
  • Locked
  • Question Question
Lifting Lug in Major and Minor Barrel in PVELITE
Replies
16
Views
1K
Groombride
Groombride
DavidScofield
  • Locked
  • Question Question
Disable laod combination in PvElite
Replies
0
Views
126
DavidScofield
DavidScofield

Part and Inventory Search

Sponsor

Back
Top