andy_oohhh
Chemical
Does anyone have experience using PVDF Impeller-Driven Pumps and how reliable they are? I was hoping to find some data or research article on it. Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
PVDF Impeller-Driven Pumps Reliability?
- Thread starter andy_oohhh
- Start date
- Status
EdStainless
Materials
Just like all polymer pumps, they work fine.
But they are very sensitive to the operating limits.
Any slight overload or over temperature and you are likely to destroy them.
And the real key is what is the reinforcement?
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
But they are very sensitive to the operating limits.
Any slight overload or over temperature and you are likely to destroy them.
And the real key is what is the reinforcement?
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
- Status
Similar threads
- Locked
- Question
- Locked
- Question