Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PVC for Hypochlorite sodium and temperatures up to 40 ¦C?

Status
Not open for further replies.
Juanlu

Juanlu

Chemical
Joined
Aug 23, 2007
Messages
1
Location
ES
Hi!
i d like to know if PVC material is suitable for commercial hypochlorite sodium fluid (12,5% conc.) and temperature conditions greater than 40 ºC (104 ºF). This PVC material is for use in a dosing pump (membrane type) and a centrifugal pump (filling tank pump).

I was searching in several corrosion tables but i have found some contradictions and it s not clear to me.

Any help, link, advise or experience managing similar situation will be very appreciated.

Thanks in advance.
 
Status
Not open for further replies.

Similar threads

H
  • Question Question
Wer H2S at elevated temperatures debate
Replies
13
Views
17K
hussaindawki
H
JoeBobJenkins
  • Question Question
Is there an equivalent to ASTM D-930 and ASTM D1280?
Replies
6
Views
21K
JoeBobJenkins
JoeBobJenkins
YungPlantEng
  • Locked
  • Question Question
Coatings for wet and hot corrosion?
Replies
10
Views
773
EdStainless
EdStainless
mrmalcolm
  • Question Question
Is intergranular corrosion test required for duplex steel
Replies
9
Views
14K
EdStainless
EdStainless
awesomeness
  • Question Question
Effect of microstructure on crevice corrosion for SDSS
Replies
5
Views
19K
weldstan
weldstan

Part and Inventory Search

Sponsor

Back
Top