Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PV factor for Steel and Silicon Nitride lubricated

Status
Not open for further replies.

CMcF

Mechanical
Joined
May 28, 2003
Messages
149
Location
GB
Does anybody have any data for the allowable loads / speeds for running a Silicon Nitride Roller on an oil lubricated steel pin 60-62 HRC.
Thanks in anticipation.

Colin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top