Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PV factor for Steel and Silicon Nitride lubricated

Status
Not open for further replies.
CMcF

CMcF

Mechanical
May 28, 2003
149
Does anybody have any data for the allowable loads / speeds for running a Silicon Nitride Roller on an oil lubricated steel pin 60-62 HRC.
Thanks in anticipation.

Colin
 
Status
Not open for further replies.

Similar threads

mariolucas75
  • Question
Carbon Equivalent Number for different steel
Replies
5
Views
5K
kingnero
kingnero
Helepolis
  • Question
Suggestion: Laser Welding System for Thin Stainless Steel & Non-Linear Weld Paths?
Replies
2
Views
2K
tygerdawg
tygerdawg
Europeeng
  • Locked
  • Question
Blast Load Shape Factor Vertical Vessel and Chimney
Replies
0
Views
243
Europeeng
Europeeng
Henrique Orlandini
  • Question
Interpretation of bolt threaded and unthreaded length for Member Stiffness calculation
Replies
6
Views
2K
Henrique Orlandini
Henrique Orlandini
F
  • Locked
  • Question
Abrasion resistant steel 1
Replies
7
Views
2K
FTBrent
F

Part and Inventory Search

Sponsor

Back
Top Bottom