Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Purging reuse control of part expressions

Status
Not open for further replies.

3dr

Automotive
Joined
Jul 10, 2004
Messages
456
Location
US
Ok, so I've been reworking some of my reuse parts. It appears that expressions used in setting up reuse the first time around aren't easily deleted.

I've got the expressions I want to delete unplugged and have no "Referenced by expressions" connectivity. (You can normally delete these)

There is now "Non-expression references" that prevent deleting. These must be from setting up the reuse because these are listed in the spreadsheet inputs.

How do I get back to the beginning, before setting up reuse?

TIA


Dave
Automotive Tooling / Aircraft Tooling / Ground Support Structures

NX9, Win 7 Pro SP1
 
If they're not being used anymore than remove them from being referenced as input to the spreadsheet as well.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top