Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pumped Storage phase reversal switches

Status
Not open for further replies.

TurbineGen

Electrical
Joined
Mar 1, 2007
Messages
489
Location
US
I have been assigned a project for replacement of phase reversal switches at a pumped hydro facility in the U.S. Our current set up uses 5 230 kv vertical air break switches on a single operator. The operator is a three position operator which moves approximately 75 degrees in either direction from neutral (all switches open). The operator may be locked in the neutral position.

Does any other pumped hydro facility use this 5 switch scheme?

Since we are looking to replace the units, does anyone know of a motor operator capable of three position operation?

What airswitch manufacturers have others been using for phase reversal? What has been your experience?

Thanks in advance

------------------------------------------------------------------------
If it is broken, fix it. If it isn't broken, I'll soon fix that.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top