Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pump type for sandy liquid 1

Status
Not open for further replies.

sealion6100

Petroleum
Joined
Jun 18, 2006
Messages
4
Location
VN
Hi all!
Could you please advise me which type of pump can be used for liquid (oil) which has sand content about 14pttb.
Thank you.
 
I know that PCPs (pregesssive cavity pumps) are used to pump slurries, so are pretty tolerant of solids.
 
DrillerNic ...is correct (except his spelling! *G*) "Moyno" makes a progressive cavity pump that I've used a number of times in sandy water service. Try the link below.

 
seepex is also a wellknown manufactor of PCP:


I have bought pumps from them and received good service.

Best regards

Morten
 
Weatherford make a downhole PCP- driven by a submersible motoer like an ESP, instead of the more common PCP setup with a surface motor and sucker rod drive shaft to a downhole pump.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top