Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

pump selection for spray nozzles

Status
Not open for further replies.
mas26amin

mas26amin

Mechanical
Joined
May 26, 2005
Messages
7
Location
IR
Dears,

I would like to select pump for some spray nozzles of dust suppression.
inlet water of nozzles should have below specification:
- Q = 3.8 lit/min
- P = 4 bar

Which type of pump do you propose for this specification?
 
Sort by date Sort by votes
A small one.

A little centrifugal type pump would appear to be the simplest and cheapest pump.

Just search small water pump 4l/min.

e.g.
small units ight not be suitable for constant running so talk to the supplier.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
Upvote 0 Downvote
3.8 l/m total or each nozzle?

It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Question Question
Request for Help – Shaft Design for BB2 Centrifugal Pump
Replies
1
Views
7K
goutam_freelance
goutam_freelance
Torque100Nm
  • Locked
  • Question Question
PUMP SELECTION
Replies
2
Views
524
Artisi
A
giuman
  • Question Question
Pump modifications
Replies
5
Views
11K
TugboatEng
TugboatEng
Ahmed Khan
  • Locked
  • Question Question
Pump selection
Replies
4
Views
522
mk3223
mk3223
J
  • Question Question
API PLAN SELECTION
Replies
0
Views
3K
jr.keng
J

Part and Inventory Search

Sponsor

Back
Top