Jul 17, 2009 #1 shingaeen Mechanical Joined Jul 15, 2009 Messages 1 Location ZW how do i select belt drive pulleys to suit an electric motor of 25H.P with speed of 2850 r.p.m. so as to achive the final speed of 540r.p.m. distance between pulleys should be 1,16m
how do i select belt drive pulleys to suit an electric motor of 25H.P with speed of 2850 r.p.m. so as to achive the final speed of 540r.p.m. distance between pulleys should be 1,16m
Jul 17, 2009 #2 MikeHalloran Mechanical Joined Aug 29, 2003 Messages 14,450 Location US Look in the back of the pulley catalog. Mike Halloran Pembroke Pines, FL, USA Upvote 0 Downvote
Jul 17, 2009 #3 diskullman Industrial Joined Oct 6, 2005 Messages 298 Location US Call your local PT ditributor. They can run it through their software to give you many options. Russell Giuliano Upvote 0 Downvote
Call your local PT ditributor. They can run it through their software to give you many options. Russell Giuliano
Jul 17, 2009 #4 dvd Mechanical Joined Nov 12, 2001 Messages 2,044 Location US Make sure your motor was designed for an overhung load, or use with a pulley. The shaft needs to be larger in diameter than a "normal" 25 HP motor. Upvote 0 Downvote
Make sure your motor was designed for an overhung load, or use with a pulley. The shaft needs to be larger in diameter than a "normal" 25 HP motor.
Jul 25, 2009 #5 chicopee Mechanical Joined Feb 15, 2003 Messages 6,199 Location US Well, if you are only intersted in the drive pulley, it's pitch dia. will be a ratio of the two given RPM's. Upvote 0 Downvote
Well, if you are only intersted in the drive pulley, it's pitch dia. will be a ratio of the two given RPM's.
Jul 25, 2009 #6 chicopee Mechanical Joined Feb 15, 2003 Messages 6,199 Location US s/b "...its pitch dia.." Upvote 0 Downvote