Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PTFE Chevon/Vee Packing

Status
Not open for further replies.
mbecker813

mbecker813

Aerospace
Joined
Sep 8, 2009
Messages
2
Location
US
I'm looking at using PTFE chevron/vee packing for a cryogenic valve stem. Does anyone have any recommended vendors for COTS packings? I saw Parker had some but there's very limited information on them and my attempts to find another vendor have been woefully unsuccessful :(
 
Sort by date Sort by votes
Try Balfor Industries.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

fabiobs
  • Locked
  • Question Question
V-Packing chevron type PTFE sealing system: how much must be compressed?
Replies
5
Views
1K
Compositepro
Compositepro
johcatrac
  • Locked
  • Question Question
Teflon packing for Control Valves
Replies
3
Views
603
gerhardl
gerhardl
Gio Grande
  • Locked
  • Question Question
Diff btw PTFE and Elastomers
Replies
3
Views
433
bcd
bcd
YungPlantEng
  • Locked
  • Question Question
Valve PMs for packing leaks?
Replies
5
Views
1K
YungPlantEng
YungPlantEng
sahsanb
  • Locked
  • Question Question
Globe Valve PTFE Gland Packing Failure
Replies
5
Views
634
HitokiriAoshi
HitokiriAoshi

Part and Inventory Search

Sponsor

Back
Top