Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PSV Testing Media

Status
Not open for further replies.
Sharik

Sharik

Mechanical
Joined
Sep 17, 2003
Messages
135
Location
CA
Where does it specify when PSV's, which are in steam service, are serviced, the final servicing pop test must be completed using steam?
 
Sort by date Sort by votes
Sharik,

See NBIC Part 3, Section 4 under 4.5.1. "Valves marked for steam service, or having special internal parts for steam service, shall be tested on steam".

Thanks Mike
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

H
  • Question Question
How Does Polyamide (Nylon) Deflashing Media Improve Surface Quality in Precision Parts?
Replies
0
Views
2K
HengLIHong
H
miramachine
  • Locked
  • Question Question
PSV inlet test requirements
Replies
5
Views
464
IdanPV
IdanPV
NamiTS
  • Locked
  • Question Question
PCC-2 2022 Pneumatic Testing Safe Distance Calculations
Replies
11
Views
3K
GD2
GD2
jeevesme
  • Locked
  • Question Question
Why do we need impact testing for 2205 flange?
Replies
7
Views
620
NamiTS
NamiTS
FoxRox
  • Locked
  • Question Question
ASME BPVC VIII-1 UG-22(g) Submarine testing vessel
2
Replies
24
Views
1K
tidytext
tidytext

Part and Inventory Search

Sponsor

Back
Top