Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
[PRV >500 BARG]
- Thread starter gguliye
- Start date
The Obturator
Mechanical
I know Anderson Greenwood Crosby (Emerson) & Leser have gone to 700 bar, but it depends on the size and application. Tai Italy also.
Per ISO, only the term Safety Valve is used regardless of application or design.
Per ISO, only the term Safety Valve is used regardless of application or design.
- Thread starter
- #3
The Obturator
Mechanical
Yes they can (I was employed in a senior position back in the day). It's not a catalogued item but a special. You need to talk with the right people. Ask for a "Block Body Valve". What size/connections/materials do you require?
Per ISO, only the term Safety Valve is used regardless of application or design.
Per ISO, only the term Safety Valve is used regardless of application or design.
Higher than 500 bar can be handeled, but dependent on exact release pressure, fluid, pressure class, tmperature and capacity.
Do you want the PRV to release to release regularily to the low pressure side, or an PSV to release at critical pressure to air?
Please specify.
- Status
Similar threads
- Locked
- Question
