RTSRI
Mechanical
- Oct 31, 2008
- 4
thread292-293908
ASME B16.9 para 9.3 testing factor f added in the 2012 edition
Para 9.5 test per previous editions are still usefull
Question does an fitting based on proof test acc 2007 edition (where factor was not present) meets the 2012 edition , based on 1 test
but not fullfilling the pressure required by a factor of 1.1 as required per 2012 edition ?
ASME B16.9 para 9.3 testing factor f added in the 2012 edition
Para 9.5 test per previous editions are still usefull
Question does an fitting based on proof test acc 2007 edition (where factor was not present) meets the 2012 edition , based on 1 test
but not fullfilling the pressure required by a factor of 1.1 as required per 2012 edition ?
