Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Protection of CI in molten aluminum

Status
Not open for further replies.

RLJ

Mechanical
Jan 8, 2001
29
I am looking for a material coating which can be applied to cast iron that will protect the cast iron when submerged into a molten aluminum bath. The coating would have to withstand 1400F temperatures, moderate abrasion, and expand similar to the cast iron. I would prefer to keep the coating thickness as thin as possible for wieght concerns.

Thanks in advance,

RLJ s-)
 
Replies continue below

Recommended for you

Hi. There is a company here in Oak Ridge that makes very high temperature coatings that are used for the very purpose you describe. Their name is ZYP Coatings, Oak Ridge, Tennessee. I think you can apply it with a simple paint brush, or with a cheap paint sprayer from a hardware store.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor