Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Properties of unleaded petrol

Status
Not open for further replies.

stanier

Mechanical
May 20, 2001
2,442
I have searched the internet and cannot find information of density, viscosity, vapour pressure and bulk modulus versus temperature (10c to 60C) for unleaded petrol.

Does anyone have a reference or link to hand for this information?

I have come across a value of density of 750kg/m3 at 15C with a "rule of thumb" that it reduces by 0.5% for each 5C change in temperature.

Thanks in anticipation.

"Sharing knowledge is the way to immortality"
His Holiness the Dalai Lama.

 
Replies continue below

Recommended for you

A google search for "Gasoline Properties" came up with several links. The first one I opened was Properties of Fuels that has most of what your are asking for (units are a problem, but Uconeer will take care of that in a flash)

David
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor