stanier
Mechanical
- May 20, 2001
- 2,442
I have searched the internet and cannot find information of density, viscosity, vapour pressure and bulk modulus versus temperature (10c to 60C) for unleaded petrol.
Does anyone have a reference or link to hand for this information?
I have come across a value of density of 750kg/m3 at 15C with a "rule of thumb" that it reduces by 0.5% for each 5C change in temperature.
Thanks in anticipation.
"Sharing knowledge is the way to immortality"
His Holiness the Dalai Lama.
Does anyone have a reference or link to hand for this information?
I have come across a value of density of 750kg/m3 at 15C with a "rule of thumb" that it reduces by 0.5% for each 5C change in temperature.
Thanks in anticipation.
"Sharing knowledge is the way to immortality"
His Holiness the Dalai Lama.