I am having a hard time finding properties on a few japanese materials. I need both the sheer strength and tensile strength of materials SWCH10R and SWCHB526. if need be, maybe the SAE equivelant. If any one could be of assistance it would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
properties of materials 1
- Thread starter rob01ltu
- Start date
hi
i guess this site would help u in finding ur required information!
waqahmad
i guess this site would help u in finding ur required information!
waqahmad
-
1
- #3
SWCH10R is found in JIS G 3539 "Carbon steel wires for cold heading and forging" It is a rimmed drawn 1010 grade steel with tensile strength 440MPa min and 45% elongation.
SWCHB526 is found in JIS G3545 "Boron steel wires for cold heading and forging" It is a boron enhanced 0.25 1% Mn drawn steel with tensile strength 750 MPa. The nearest SAE grade would be 10B26.
Hope this helps
SWCHB526 is found in JIS G3545 "Boron steel wires for cold heading and forging" It is a boron enhanced 0.25 1% Mn drawn steel with tensile strength 750 MPa. The nearest SAE grade would be 10B26.
Hope this helps
- Status
Similar threads
- Locked
- Question
- Locked
- Question