Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Properties for block caving modelling.

Status
Not open for further replies.
AM07

AM07

Mining
Feb 6, 2007
1
Hi guys,

I am looking for typical rock mass properties for soft and hard caves: cohesion, friction angle, tensile (or UCS), Young's modulus.
Any suggestions? References?

Thanks.

AM07

 
Status
Not open for further replies.

Similar threads

Alan Power
  • Locked
  • Question
Should a vibrating screen on springs be considered for Seismic loading
Replies
3
Views
7K
horacio Torres
horacio Torres
cemmchl
  • Locked
  • Question
Maptek Vulcan- Making blocks smaller
Replies
0
Views
590
cemmchl
cemmchl
Stewie8
  • Locked
  • Question
Yield Criteria for peak and ultimate strength
Replies
3
Views
253
oldestguy
oldestguy
LRMAAX
  • Locked
  • Question
Typical programming needs for Mining Engineers
Replies
1
Views
179
capliard
capliard
MuzaffarSultan
  • Locked
  • Question
Criteria for tagging the manual valves on P&IDs
Replies
0
Views
117
MuzaffarSultan
MuzaffarSultan

Part and Inventory Search

Sponsor

Back
Top Bottom