Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ProMechanica Modeling help !!

  • Thread starter Thread starter smantris
  • Start date Start date
S

smantris

Guest
I have had a tough time with the analysis of one of my FE model in Mechanica. The problem here is that, there is one solid element in my FE model which has an invalid geometry, because of which my static analysis is terminating. I am unable to mark that element ( within a group of 70K elements ) but i do have the element entity ID. Can anyone Please let be know how to delete a solid element in the Mechanica Model using its entity ID.
 
You must log in or register to reply here.

Similar threads

T
Help with paint mist extraction systems
Replies
0
Views
7K
technician
T
C
dyn analysis displacement graph help
Replies
1
Views
3K
Chris_M
C
J
File extension for importing Table data into ProMechanica Wildfire 4.0
Replies
1
Views
3K
rework
R
M
help with Mechanism
Replies
1
Views
3K
Coosa
C
topdog33233
  • Locked
  • Question Question
Creo Simulate 2.0 optimization gets stuck! (need urgent help please)
Replies
0
Views
255
topdog33233
topdog33233

Part and Inventory Search

Sponsor

Back
Top