Projecting sketch elements from 3d model to catdrawing?

[dtwo]

I have a catproduct and catdrawing I am updating in V5R17.
The existing drawing contains elements (lines and points) that exist inside a sketch in the catproduct. Trying to keep with the same process I want to project sketch elements over to the 2d catdrawing. Is there a setting for this?

 

[Azrael]

Think you need to turn on to show wireframe, it's a property option for the view, or you set it as default in tools/options. Depending how the specification tree looks like there is also a possibility that the prevoius user multiselected bodies/sets when generating view, to limit what will be shown on the drawing view.

 

[m1mason]

yes it is better that you enable it in:

Tools>options> Mech Design>Drafting>Views
check both Project 3D wireframe and points.
if you don't enable that then you'll always get the message that the part has nothing to project.

http://mtm-cadtutorials.blogspot.com/

 

[itsmyjob]

Hello,

I remeber having some problem with infinite line in sketches and projection in a CATDrawing.

If you have some issue, check inside the sketch for infinite line...

Eric N.
indocti discant et ament meminisse periti ​