ProE post-processor

[trucan1312]

i need ProE post-processor for the heidenhain ( CNC 5 axis -X,Y,Z,A,C- table-table )
i waiting your help .
thanks

 

[manussim]

Hi,



We are a company that developes advanced post processor solutions for
all types of CNC machine tools including 3 to 5 axis simultaneous
machines, mill-turn machines and so on. We have advanced level of
knowledge on Heidenhain iTNC530 control unit .
MANUSpost, our postprocessor solution is widely used in industry and
also supports ProEngineer Wildfire all series.



In order to see our references and the capabilities of MANUSpost, please visit our web page at www.manusnc.com



If you want to evaluate our product, please send a request to info@manusncsoft.com



Regards,



Ender CENG

 

[seth505]

If you check out ptc.com and log in, you can use the search for "post processor library". You will find example posts including Heidenhain. Just know that these need to be customized and you should use a professional to customize the post if you are not familiar with it.

 

[trucan1312]

Thanks

 

[turbocharger]

Actually this is a forum to help the other's by sharing the knowledge and new ideas.


With due excuse to Mr. Ender CENGYZ, who take every oppoutunity for the advertisment of his company to sell the postprocessor. The postprocessor you people are making are external postprocessor means you generates the CL files call this file in your post then after postprocessing this you send this on machine so definitly the chances of error are much more, may be some body generats the G-codes of wrong Cl file the what will happen you can imagine ?Moreover any one can make in C++ or VB, what maximum they need is the basic understanding of rotation matrix.


Here we only promote the builtin postprocessor which are made in Gpost + Fil language, these are the internal postprocessors means we need not to re invent the wheel by writing th algorithm or logic,they also directly generates the G codes from Cl files.


Dear Truc-An please send me the model name of your machine or just picture, rest i will do in pro-E and then will sent you the tested and certified post.


thank

 

[MD1305]

Heidenhain iTNC 530 PP (DMU 80P) for Creo

Actually this is a forum to help the other's by sharing the knowledge and new ideas.


With due excuse to Mr. Ender CENGYZ, who take every oppoutunity for the advertisment of his company to sell the postprocessor. The postprocessor you people are making are external postprocessor means you generates the CL files call this file in your post then after postprocessing this you send this on machine so definitly the chances of error are much more, may be some body generats the G-codes of wrong Cl file the what will happen you can imagine ?Moreover any one can make in C++ or VB, what maximum they need is the basic understanding of rotation matrix.


Here we only promote the builtin postprocessor which are made in Gpost + Fil language, these are the internal postprocessors means we need not to re invent the wheel by writing th algorithm or logic,they also directly generates the G codes from Cl files.


Dear Truc-An please send me the model name of your machine or just picture, rest i will do in pro-E and then will sent you the tested and certified post.


thank

Hi,

It would be very much helpful if somebody can provide with PP for Heidenhain iTNC 530 PP (DMU 80P) for Creo.

Thanks in advance.

--
Dhinesh