Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Proctor Test with 6 inch mould

Status
Not open for further replies.
Jameschen6

Jameschen6

Geotechnical
Joined
Jun 28, 2008
Messages
25
Location
CA
When testing a granular material, it required to test portion passing 19mm sieve (26.0mm for Ontario). How much material is needed for the moisture testing for such grain size material? Many times the curve appear in odd shape due to the moisture results. What is your comments
 
Sort by date Sort by votes
I would use at least 200g, preferably 400g.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

cpdonahue
  • Locked
  • Question Question
Running a Proctor Test
Replies
3
Views
1K
morecoffeeplz
morecoffeeplz
DirtSmuggler
  • Question Question
Soil Lab Test
Replies
3
Views
3K
Victorwilliams
V
geo24
  • Question Question
Phi Angle in CU Test
Replies
2
Views
5K
geo24
geo24
I
  • Locked
  • Question Question
Question about Direct Shear Test, CU and UU test
Replies
2
Views
2K
ripongeo
ripongeo
learning2geotech
  • Locked
  • Question Question
Ignore Circle in CU Triaxial Shear Test
Replies
1
Views
2K
EireChch
EireChch

Part and Inventory Search

Sponsor

Back
Top