Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Process question

Status
Not open for further replies.

IngGasP

Petroleum
Joined
Mar 18, 2012
Messages
20
Location
DZ
Hi!
1- If you are starting up a cold steam heater and you hear a noise, what would the action to be taken?
2- What is the difference between spectacle blind and sleep plate?

Greetings
 
Is this for school?

TTFN
faq731-376
7ofakss
 

1. Look for the nearest exit and think about how long it would take you to get there with your eyes closed..

2. About $286.90 in carbon steel.....according to my local supplier :)

 
To IRstuff
It isn't for school because you're right it seems to be. But what I wanted is to analyse this two questions.
The first question deals with writing operation procedure on process eqpt (underway), and I wanted to have someboby having long experience in oil and gas operational engineering to give me if there are some situations related to my question.
The second question is related to safety , How? in our plant, I was asked to not isolate by sleep plate near pump taken to be overhauled so only put spectacle blind. So far in our work permit it doesn't mind which one is preferally to be placed. Unless for high pressure, I've never seen isolating using sleep plate.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top