Sep 19, 2004 #1 gladkenn Mechanical Joined Jul 25, 2004 Messages 58 Location US We will be using Potassium Permanganate for our scrubber. Any suggestions in handling this chemical as it is hazardous and safety to personnel is very sensitive for this.
We will be using Potassium Permanganate for our scrubber. Any suggestions in handling this chemical as it is hazardous and safety to personnel is very sensitive for this.
Sep 19, 2004 #2 hacksaw Mechanical Joined Dec 7, 2002 Messages 2,587 Location US material data safety sheets are the best source if you employer does not have them, then the supplier of the chemical or the internet is a good source Upvote 0 Downvote
material data safety sheets are the best source if you employer does not have them, then the supplier of the chemical or the internet is a good source
Sep 19, 2004 Thread starter #3 gladkenn Mechanical Joined Jul 25, 2004 Messages 58 Location US Thanks. I have it already from the internet. Upvote 0 Downvote
Sep 23, 2004 #4 jsummerfield Electrical Joined Jan 26, 2003 Messages 671 Location US The greater hazard is likely the material after it absorbed the H2S, etc. John Upvote 0 Downvote
Sep 23, 2004 #5 saxon Chemical Joined Oct 9, 2002 Messages 409 Location US gladken, Check the following website: http://www.caruschem.com They're the worlds largest manufacturer of Potassium Permanganate. Hope this helps. saxon Upvote 0 Downvote
gladken, Check the following website: http://www.caruschem.com They're the worlds largest manufacturer of Potassium Permanganate. Hope this helps. saxon
Sep 24, 2004 Thread starter #6 gladkenn Mechanical Joined Jul 25, 2004 Messages 58 Location US I've got another question! Is KMnO4 solution reacts with BI pipe? Upvote 0 Downvote