Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Procedure for air test

Status
Not open for further replies.
monirri

monirri

Mechanical
Joined
Feb 22, 2006
Messages
44
Location
CO
We have a 28m diameter new API 650 tank with a roof we need to air test. Considering the dangers of overpressure during the test, does anyone have a procedure for testing? One thing I know is that I could use a water syphon because of the low pressure involved. Thanks

Carlos Molina from
 
Status
Not open for further replies.

Similar threads

J
  • Question Question
IFR air raise calcs
Replies
10
Views
6K
LittleInch
LittleInch
Ahmed Habashy
  • Locked
  • Question Question
Air testing of pads
Replies
1
Views
318
JStephen
JStephen
shvet
  • Locked
  • Question Question
Air moisture absorption by chemicals
Replies
2
Views
374
shvet
shvet
rohit307
  • Question Question
Anchorage Ratio for Rectangular Tank
Replies
6
Views
5K
rohit307
rohit307
T
  • Question Question
Required Thickness Calculation for Nozzles in API 650 Tanks
Replies
3
Views
3K
HTURKAK
HTURKAK

Part and Inventory Search

Sponsor

Back
Top