Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problems with Wildfire 4.0

Status
Not open for further replies.
ragnor

ragnor

Automotive
Joined
Apr 11, 2008
Messages
1
Location
ES
Hi,

I've a problem with Pro/E Wildfire 4.0. I can open and create a new sketch and all 2D image types, but when I'm opening or creating a 3D part or assembly, the program shut down.

I am using Wildfire 2.0 without problems. I have T7500, 2Gb RAM and Windows Vista.

Do you know what happen?

Thanks.
 
Status
Not open for further replies.

Similar threads

pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave
mattmyer
  • Locked
  • Question Question
Font Problems in Creo drawings
Replies
2
Views
2K
dgallup
dgallup
B
  • Locked
  • Question Question
with lookup_inst function variants change family table via parameters
Replies
1
Views
2K
3DDave
3DDave
whatev-nvm
  • Locked
  • Question Question
OBJ of a simp rep of an assembly gets exported with incorrect coordinate system
Replies
0
Views
1K
whatev-nvm
whatev-nvm
samim09me
  • Locked
  • Question Question
creo 4.0 with 3dexperience connector mxpro issue
Replies
0
Views
321
samim09me
samim09me

Part and Inventory Search

Sponsor

Back
Top