Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

problems in WWTP

Status
Not open for further replies.

FilipaPires

Civil/Environmental
Joined
Dec 18, 2013
Messages
1
Location
CV
Hello,

I am having low oxigen levels in my aeration tanks and not being able to really understand why it's happening now. Can someone please give me a hint?

Thank you

 
Perhaps your aeration diffusers are plugged. Typically, the systems are designed with an excess of aeration capacity.
 
broken submerged air header, lateral, diffuser cap? look for irregularity in the patterns on the water surface
 
What kind of blowers do you have? Are your air filters clean? Centrifugals can see a large decrease in SCFM with a dirty filter. And washing them or blowing them out with compressed air may not clean them enough to get your rated capacity.

Has your waste stream changed? Is someone dumping something in large quantities that could effect your aeration? Have you checked COD/BOD on influent to see if it is normal?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top