Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with tol_text_height_factor in .dtl

Status
Not open for further replies.

josson

Mechanical
Joined
Dec 9, 2004
Messages
12
Location
US
Hi,

When I adjust the tol_text_height_factor in the .dtl nothing happens. It is my understanding that when I change this ration, the size of my tolerances in the plus-minus format should change accordingly relative to the dimension text size. Oddly enough the tol_text_width_factor seems to work find for me.

Has anyone experinced this before. Is it a build related issue? Are there any settings that might overide this?

I am using Wildfire 2 build M130.

Thanks
 
What kind of dimension display are you using? tol_text_height_factor only affects Plus-Minus tolerances, not +-Symmetric tolerances and of course not nominal or limit dimensions.
 
It is just to Plus-Minus tolerances that I am trying to adjust the size on.
 
It works for me using WF2 M220.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top