Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with drawings of large assemblies

  • Thread starter Thread starter Jose Pastor Beltran
  • Start date Start date
Status
Not open for further replies.
J

Jose Pastor Beltran

Guest
Hello,

I use Pro/Engineer Wildfire 4.0 with a card drive Nvidia Quadro FX 1700. When I work with drawing plane of large assemblies and drawing have cross view sections the computer is very slow.

What is the problem? Pro/Engineer or the card drive?

Best Regards,
Jose Pastor Beltran
 
It could be ram too. If you already have a good Video card with 512MB ram, try using simplified representations and envelops and zones. they are easy on memory.
 
Status
Not open for further replies.

Similar threads

mattmyer
  • Locked
  • Question Question
Font Problems in Creo drawings
Replies
2
Views
2K
dgallup
dgallup
whatev-nvm
  • Locked
  • Question Question
OBJ of a simp rep of an assembly gets exported with incorrect coordinate system
Replies
0
Views
1K
whatev-nvm
whatev-nvm
B
  • Locked
  • Question Question
with lookup_inst function variants change family table via parameters
Replies
1
Views
2K
3DDave
3DDave
Sidtha
  • Locked
  • Question Question
How to get the Balloon Position from CATIA V5 Drawings using VBA
Replies
1
Views
1K
looslib
looslib
pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top