Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with Cable system

Status
Not open for further replies.

NiceeHEAD

Aerospace
Jan 5, 2017
3
RU
Hello, friends. I have some sort of trouble working in machinery module. I can't wrap a cable between two pulleys if that pulley was extra rotated around any axis. But the same pulley created with marker works (Adams can wrap a cable between them but it does it in the wrong way- cable doesn't skirt a pulley but is located at one side). Why can't I wrap a cable between two pylleys created by different ways and why doesn't the created cable skirt around the pullley?
Thank you!
 
 http://files.engineering.com/getfile.aspx?folder=161e8ea4-b317-466e-9106-825cb68a9dd8&file=Shot.JPG
Replies continue below

Recommended for you

Thank you for your answer but I have already seen the HELP so it didn't help so much... There is no information about creating pulleys by different ways. Only how to create and use.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top