Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem of rigid body surface

Status
Not open for further replies.

Engelien01

Bioengineer
Joined
Jul 18, 2006
Messages
7
Location
US
I define a 4 parts model tower. On the ends are rigid bodies and in the midle are deformable ones. I started already with 3 part model, but now I get always the ERROR message:

"The slave surface assambly_pickedup32 cannot be rigid." (That is the surface of top rigid body.)

What does the message mean exactly?

thanks
 
As far as I know rigid surfaces must be always the master surface in a contact definition. try it

PC
 
Thanks - I had to change all surface-to-surface combinations, that aba accept my change to master. :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top