Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

problem in running analysis

  • Thread starter Thread starter gurdyal
  • Start date Start date
Status
Not open for further replies.
G

gurdyal

Guest
hi everyone !


i am new user to pro/e mechanica. i am succesful in running mechanica integrelly.but now i have problem in running any analysis.After asisgning material & providing load & constraint, when i run analysis it shows message "CAN NOT START DESIGN STUDY ".


plz help me in solving problem wheather my methed is wrong?
 
Maybe you didn't create the mesh, or you deleted it before starting the analysis.
 
May be you don't have the license to run Mechanica solver.


I suggest you elaborate your problem with jpgs.


Israr
 
Status
Not open for further replies.

Similar threads

bbLTI
  • Locked
  • Question Question
Force vs. Displacement in Creo Simulate
Replies
0
Views
941
bbLTI
bbLTI
R
Point Force in Mechanism
Replies
0
Views
48K
rework
R
Glenn Gordon
  • Locked
  • Question Question
Rigid Link Loading in Creo Simulate
Replies
1
Views
1K
davidh729
davidh729
S
Dynamic Analysis of Theo Jansen walking mechanism
Replies
0
Views
37K
Sai Rakesh
S
T
Angle analysis feature to be used as a dimension in a drawing table
Replies
1
Views
14K
annad_m_s
A

Part and Inventory Search

Sponsor

Back
Top