Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pro program

  • Thread starter Thread starter karthik23
  • Start date Start date
K

karthik23

Guest
Hi,

Can any sort of link be given between variables from one program to another.

i.e if a dimension is calculated using some relations in a program, the value assigned to the dimension (after computation) should be used in some other programs.
 
If all that is written in context on single assembly then you can do that in ProProgram.
 
You must log in or register to reply here.

Similar threads

pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave
Designer_D
  • Locked
  • Helpful tip Helpful tip
Original Pro/Engineer Blue Background Color Values (thread554-165973)
Replies
0
Views
2K
Designer_D
Designer_D
mattmyer
  • Locked
  • Question Question
Font Problems in Creo drawings
Replies
2
Views
2K
dgallup
dgallup
J
Pro-E Wildfire 4.0 Programming assistance needed !!
Replies
0
Views
3K
Joe Pie
J
W
Handling GA Model and GA drawing created using Pro-Program
Replies
0
Views
7K
write2bush
W

Part and Inventory Search

Sponsor

Back
Top