Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pro/Program help

Status
Not open for further replies.
oliverhidalgo

oliverhidalgo

Mechanical
Joined
Jan 28, 2013
Messages
1
Location
US
Hello, I have an issue and i want to work faster, can someone help me to code something that will be really helpfull to me.
I have standards parts that never calls like the parts that i want, so I loose a lot of time translating the name of the .prt to the partid, can I just type the name that i want it and look in a excel table to find the correct file name?? Can someone help me with this?

Thanks!
 
Status
Not open for further replies.

Similar threads

pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave
Designer_D
  • Locked
  • Helpful tip Helpful tip
Original Pro/Engineer Blue Background Color Values (thread554-165973)
Replies
0
Views
1K
Designer_D
Designer_D
M
need help with COG in creo
Replies
0
Views
7K
Mango_5
M
mattmyer
  • Locked
  • Question Question
Font Problems in Creo drawings
Replies
2
Views
2K
dgallup
dgallup
J
Pro-E Wildfire 4.0 Programming assistance needed !!
Replies
0
Views
3K
Joe Pie
J

Part and Inventory Search

Sponsor

Back
Top